NON-ACOUSTICALLY RATED FOLDING PARTITIONS - SPECIFICATIONS

DURAFLEX - General Conditions Furnish and install accordian partitions as indicated on architectural plans. Complete drawings shall be provided prior to fabrication showing installation details and construction. Related work by others: All headers, support structures, surrounding insulation, jambs, blocking and trim is required for installation of the folding partitions. Prepare the openings to the dimensions specified, plumb and level and in accordance with approved drawings. Headers shall be levelled with the floor to within _+3mm tolerance over the entire length of the opening. DIMENSIONS, WEIGHTS AND MEASURES - General Specifications A. Hanging weight of the partition shall be 9.75kg/m2. B. Stack Depth Ratio = 125mm per lineal metre of opening plus 64mm for leadpost. C. Maximum Height 6000mm.

1. PRODUCT: Shall be DuraFlex as manufactured by the Won-Door (NZ) Ltd.

2. OPERATION: Folding partition shall be top supported on single tracking and be manually operated.

3. CONSTRUCTION: Shall consist of a single accordian type wall of panels suspended from a single track. Panels shall be connected by full height extruded vinyl hinges.

4. PANELS: Shall be 115mm wide x 1.50mm thick extruded aluminium, v-grooved for maximum strength and resilience.

5. PANEL FINISH: Shall be electrostatically powder coated and shall be moisture, mildew and corrosion resistant. Panel and hinge colour shall be selected from manufacturer's standard colour range.

6. SUSPENSION SYSTEM: Shall consist of a single extruded aluminium track attached to the overhead structural support in accordance with the manufacturer's recommendations. Each panel shall be suspended by a 9.5mm diameter #2024 aluminium hanger pin and a 25mm diameter nylon-tired ball bearing roller.

7. LEADPOSTS: Each leadpost shall be suspended by a 4-wheel ball bearing carrier and shall be 1.9mm x 50mm x 38mm extruded aluminium connected to the body of the partition by specially designed extruded aluminium panels.

8. HARDWARE: Shall include standard grip-type handles and sliding latch to effect closure. (Provisions for key locking shall be optional).

9. PERIMETER SEALS: Shall consist of continuous extruded vinyl sweep strips attached to the top and bottom of the partition. Leading edges of leadposts and receiver posts shall be sealed by extruded vinyl interlocking seals.

10. COMBUSTIBILITY: Folding partitions shall be constructed of totally non-combustion sustaining materials.

11. MANUFACTURER'S GUARANTEE: The folding partitions shall be guaranteed against defects in materials and workmanship for a period of 3 years from date of purchase.

INSTALLATION:

1. Installation shall be done by Won-Door authorised installers.

2. Preparation of the openings shall be the responsibility of the General Contractor. The Architect shall be notified in writing of any deviations or site conditions different from approved drawings.

3. Installation shall be guaranteed for (3) years from date of installation against defects in material and workmanship.

Specifier's note: Consult Won-Door architectural catalogue or Won-Door (NZ) Ltd for product details.

Please Won-Door for technical details and drawings (see below).